WITOPED eco pipetting aid

Accessories: Our pipetting aid includes a charger, a practical table stand that allows the device to be set down safely, a spare filter and an adapter for wall mounting.

Digital display and speed setting: The battery level and the set speed are displayed digitally. The pipetting speed can be adjusted in 6 levels, numbered from 1-6, and is easy to read. The new adjustment knobs “+/-” are sensitively optimized. The charge status of the battery can be easily seen in 5 block levels. So you can charge your pipette controller in time.

Holding cone: The pipette holder is suitable for all types of pipettes, as the inner cone is made of silicone and holds all known pipette suction tubes in place. In the event of contamination, the silicone adapter can be easily replaced.

Operation: The pipetting aid has 2 control buttons in the grip area. The top button controls the filling process of the pipette. Its speed can be finely adjusted in 6 stages.
The lower button enables the pipette to be emptied when pressed and has the same speed mode from 1 to 6. Free drainage is also possible. The speed can also be sensitively regulated by pressing the buttons with your finger.

Motor: The powerful motor of our WITOPED eco pipetting aid is sophisticated and reliable with a long service life.

Service: The pipette holder can be easily unscrewed and then reveals the silicone adapter and the filter above it. In the event of contamination, these individual parts can be easily removed, cleaned or, if necessary, replaced. The silicone adapter is autoclavable at 121°C.
The quality tests are carried out and confirmed in accordance with the ISO 8055 standard. The overall production of the pipette controller is in accordance with ISO 9001:2000 and ISO 13485.