Features of Spray Dryer Pulvis Mini Spray (GB210-A)
Spray Dryer Pulvis Mini Spray (GB210-A)
Description
Features
Compact spray dryer that can produce
powder easily on a laboratory scale. It is
capable of variety of applications from
preliminary experiments in a pilot plant to
drying work in general laboratories.
Features
Samples unstable at high temperatures can be
reliably processed into fine powder. The heat is
applied instantly and indirectly to the powder itself
Features
Prepared fine powder will not be oxidized, contains
minimal moisture and is contaminant-free
Features
Direct drying from solution/suspension liquid to
fine powder with a reduced risk of contamination.
No pre or post processes such as filtration, separation,
or pulverization are required
Features
Processing of samples containing organic
solvents is made possible by connecting the
Solvent Recovery Unit GAS410
Features
This unit can also be used as a fluid bed drying
granulator by installing a separate mini bed
attachment GF200 instead of GF300 spray drying
attachment
Features
An automatic lift is equipped as standard to
enable easy installation or removal of glass drying
chamber attachment
Features
A service outlet (max. 2A) and a sample stand are
equipped as standard for connecting a magnetic
mixer for stirring suspended liquid sample
Features
Stable spray drying using a unique peristaltic pump,
nozzle cooling mechanism, pulse jet mechanism
and a nozzle knocker enable stable spray drying
Control Panel
Inlet temperature, outlet
temperature, and drying
air amount are digitally
displayed. Setting is made
on the touch panel that
allows operation settings,
operation status display
as well as error display, and settings of various
operation conditions.
| Model | GB210-A |
|---|---|
| Temp. adjusting range | 40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature) |
| Temperature adjusting accuracy | Inlet temperature±1°C |
| Spraying system | Two-way nozzle, Nozzle No. 1A as standard |
| Drying air amount adjusting range | 0 to 0.7m3/min |
| Spray air pressure adjusting range | 0 to 0.3MPa |
| Liquid sending pump flow rate range | 0 to 26mL/min |
| External output | Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA) |
| Automatic lift | Moving up/down of glass chamber automatic lift |
| Temperature adjusting device | PID digital temperature adjusting device |
| Touch panel | Blower, Heater, Liquid sending pump, Pulse jet switch, Error display |
| Control select switch | Inlet temperature, Output temperature control switch (Outlet temp. control is conditional) |
| Heater | 2.0 kW (at 200V) to 2.88 kW (at 240V) |
| Liquid sending pump | Fixed amount peristaltic pump |
| Spraying air pump | Spraying air compressor (Sold separately) is used. |
| Service outlet | For stirrer: AC100V, Max. 2A |
| Suction blower | Bypass blower, Brushless DC motor |
| Filter | Suction filter, Exhaust filter |
| Recovery of solvent | Solvent recovery unit GAS410 (sold separately) is used. |
| Spray nozzle cooling mechanism | Connector: Nipple×2, O.D.:ø10.5 mm |
| Spray air connection diameter | Nipple diameter:ø7 mm |
| Exhaust connecting diameter | ø50mm |
| Safety device | Inlet / Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error |
| Accessories | Silicon tube (with a stopper)×3, Tiron tube (with a stopper)×2 Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, Teflon braided hose 5m (with two hose bands), Container table |
| External dimensions（W×D×H mm） | 760×420×1350mm |
| Power Source | AC220V 17A |
| Weight | 110kg |
