Didactic System of Domestic Energy Production Teaching Equipment Automatic Trainer
Didactic System of Domestic Energy Production Teaching Equipment Automatic Trainer
Description
MR380E Didactic System of Domestic Energy Production Teaching Equipment Automatic Trainer
I. Product overview
This training device system can simulate and demonstrate the process of wind power generation and solar power generation, so that students have a preliminary intuitive understanding of wind and solar hybrid power generation systems. The wind generator is driven by a blower, and the solar panel is driven by high-brightness LED lights. Through relevant experiments, cultivate students’ corresponding knowledge and skills.
1.2 Features
(1) The training platform adopts the aluminum profile column frame structure, the measuring instrument and the training power supply are built-in and integrated, and the bottom is equipped with universal wheels. Each unit is flexible, easy to use, and not easy to damage.
(2) The experimental circuits and devices are fully equipped and can be used in combination to complete the training content of various courses.
(3) The training platform has a good safety protection system.
II. Performance parameters
(1) Wind power generation device: The fan unit adopts aluminum profile structure, the blower can be adjusted by 90 degrees in the horizontal direction, and the overall size is 1210*1210*2440mm (length, width and height)
(2) Solar power generation device: all aluminum alloy structure, the angle of the photovoltaic panel can be adjusted, the simulated light source can be adjusted at 120 degrees in the vertical direction, and the overall size is 1500*1500*2750mm (length, width and height)
(3) Training platform size: aluminum profile frame structure, aluminum alloy hanging box unit form, with universal wheels at the bottom, dimensions 1610mm×800mm×1700mm (length, width, height)
(4) The parameters of a single solar panel are as follows:
Rated peak power: 30W
Short circuit current: 1.9A
Maximum current: 1.71A
Maximum voltage: 17.6V
Short circuit current: 1.87A
Open circuit voltage: 21.6V
(5) Fan parameters:
Fan type: horizontal axis facing direction
Speed: 1310 RPM
Motor power: 0.7KW
Voltage: 220V/50Hz
Air volume: 10600m³/h
(6) Technical parameters of battery:
Voltage: 12V
Capacity: 40Ah
Battery loss: 10V±1V
Executive standard: GB/T 9535
Relative humidity: 35~85%RH (no condensation)
(7) Working environment:
Temperature -10～+40℃ Temperature≤80℃
Ambient air: no corrosive, combustible gas, no large amount of conductive dust
(8) Power supply:
Power consumption: ≤5000W,
Power supply: AC120±5%,
Power supply: single-phase three-wire AC120±5%, 50HZ
Working method: continuous
(9) Total weight: 200Kg
III. System introduction
This system is divided into four parts: wind power generation system, photovoltaic power generation system, control system and inverter system. The wind power generation system is composed of blower, generator, and battery pack. The photovoltaic power generation system consists of a simulated light source device, photovoltaic panels and battery packs. The control system is composed of wind and solar hybrid controllers. The inverter system consists of a power frequency inverter, a rectifier filter unit, a DC-DC conversion module and a load unit.
1. Simulate wind power generation equipment; this system uses horizontal axis permanent magnet synchronous generators, uses a blower to simulate natural wind, and adjusts the position of the blower to simulate changes in wind direction and wind changes to detect the power generation effect under corresponding conditions.
2. Simulated photovoltaic power generation system: This system uses 4 30W monocrystalline silicon solar panels, which can be connected in series and parallel according to different system voltages. The simulated solar device consists of 4 halogen lamps with adjustable brightness, which can be adjusted with photovoltaic panels. To simulate the position of sunlight, it is convenient to simulate the demonstration of various sunshine conditions.
3. Battery pack: It is composed of 4 12V/40AH maintenance-free sealed batteries, which can be used in 12V200AH system in parallel, or used in 24V/100AH system in series, which can deepen the understanding of battery series and parallel applications.
4. Controller hanging box: This hanging box uses an industrial charging controller, including an interface for data collection through a PC, which can control the power generated by the wind turbine and photovoltaic panels to charge the battery. The LCD panel can be viewed System operating parameters and user parameters can be set by themselves, with perfect overcharge and overcurrent protection functions.
5. Inverter hanging box: 24V voltage intelligent identification industrial frequency inverter, output voltage AC110V, continuous power 600W, peak power 1000W. The conversion efficiency is greater than 90%, and the low-voltage automatic alarm.
6. Instrument hanging box; real-time display of power generation voltage, power generation current, charging voltage, charging current, inverter voltage, and inverter current.
7. Terminal load hanging box: including resistance, inductance and capacitance loads, different types of load tests are carried out on the 110V alternating current converted by the inverter.
8. Rectifier filter hanging box: use power diodes to form a bridge rectifier circuit to convert alternating current into direct current, and include inductance and capacitance for filtering.
9. DC-DC conversion module: can convert 5-30V voltage into 0.5-30V voltage.
3.2 Training table
The training table is supported by aluminum profile columns, and the bottom universal wheels are braked, which can be moved and positioned flexibly. The desktop adopts a 25mm-thick high-density substrate, and the surface is treated with high temperature and high pressure fireproof board veneer. It is equipped with 2 three-section guide rail drawers and 2 sliding door bottom cabinets. The structure is firm and beautiful.
3.3 Power control screen configuration
(1) Voltmeter and ammeter do measurement display and output indication.
(2) Equipped with power indicator light and safety power output terminal.
(3) Built-in AC power supply with short circuit protection function.
(1) 1 controller hanging box
Instructions:
1. Operation instructions
①Key function description
0K enter the next menu or confirm parameter settings
“
”Reduce the value when switching between the same level menus or setting parameters (long press for more than two seconds to quickly change the value)
“
”Increase the value when switching between the same level menus or setting parameters (long press for more than two seconds to quickly change the value)
“Esc”Return to the previous menu or exit the command
2. Modify parameter operation instructions
The user can manually set the parameters shaded in gray in the above figure according to the system configuration
②Parameter setting steps
Press the OK button to enter the parameter setting, the highest digit of the set parameter value flashes
Decrease or increase the flashing digits through the and keys
The numbers are modified sequentially from left to right. After modifying a digit, press OK to skip to the next digit. When the last digit is modified, press OK to save, and press ESC to exit the modification.
